EMC shield clamps, single
for direct mounting via rivets
EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.
The EMC cable clamps offer a large contact area to the cable shield. In comparison to conventional shielding brackets an up to 50% higher contact area can be achieved when using icotek EMC shield clamps. The specified clamping range can be exceeded up to 10%.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm cable shield: width 26.25 mm).
The shield clamps can be easily attached via rivet.
Part No.
36217
Advantages and benefits
Large contact area
Shield contact and strain relief separated
The spring design requires no adjustments and will permanently maintain contact to the cable shield
Space-saving design, even when fully assembled
MSKL: Large clamping areas, therefore less product sizes needed to cover a large cable diameter range
Shock and vibration resistant, maintenance free
EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.
The EMC cable clamps offer a large contact area to the cable shield. In comparison to conventional shielding brackets an up to 50% higher contact area can be achieved when using icotek EMC shield clamps. The specified clamping range can be exceeded up to 10%.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm cable shield: width 26.25 mm).
The shield clamps can be easily attached via rivet.
Assembly video
Assembly video
Convince yourself of the simple and
time-saving assembly of our products.
Watch the assembly video!
